Standard PumpStandard Pump drum pump motors are the drive end of a drum pump: open drip proof, TEFC, explosion-proof, and washdown electric motors, plus compressed-air motors, from 1/2 hp (370 W) to 5 hp (3.7 kW). Designed for drum and tote transfer, each drives a separately purchased Standard Pump pump tube.
$964.00
PA - GA - OH - TX - OR
Product details
Headline
Electric and air drum pump motors, 110V through 230V and pneumatic
Features & benefits
- Four enclosure classes. Open drip proof (IP44) for clean indoorduty, TEFC (IP54) where dust and splash are present, explosion proof (IP55) for hazardousareas, and air motors where no electricity is wanted at all.
- 110V and 220-240V single phase at 50 to 60 Hz, plus three-phase options.
- Variable speed on the -V motors, so the operator can throttle a decanting job.
- Thermal overload on every electric motor.
- One shaft interface. The same motor drives any Standard Pump tube, so a plant can keepone drive and several tubes.
Additional notes
Explosion proof motor regulations require that motors be returned to themanufacturer for repair. Air motors are not recognized under any current UnderwritersLaboratories listing program; consult a qualified engineer for suitability on flammables or ina hazardous area.
SP-B2 air motors must be lubricated daily, and the maker recommends a filter lubricatorregulator.