Standard PumpStandard Pump's batch control systems pair a sealless centrifugal drum pump with a turbine meter and a preset controller, rated 4 to 27 GPM and ±1% of reading on 2+ gal batches. Designed for batching from drums, IBCs, and tanks, they are not suitable for pumping flammable or combustible liquids or use in a hazardous duty environment.
$4,971.60
PA - GA - OH - TX - OR
Product details
Headline
Batch control drum pump systems that dispense a measured volume and stop
Features & benefits
- Preset the batch. Ten programmable presets on a liquidcrystal display; the pump stops at the batch volume.
- Accuracy of plus or minus 1 percent of reading at 2 gal (7.6 l) and above, and plus orminus 2 percent at the 1 gal (3.8 l) minimum batch.
- Turbine (paddle wheel) metering in the discharge path, with chemically resistant wettedcomponents.
- Multi-lingual controller with a three-colour backlight and a pulse output relay. Remotestart is supported with additional components.
- Electric drive, in polypropylene or PVDF wetted systems, at five immersion lengths.
Additional notes
Not suitable for pumping flammable or combustible liquids or for use in ahazardous duty environment.
Batches below the 1 gal (3.8 l) minimum may compromise accuracy. Additional immersion lengthsare available on request.
The air datasheet is the same document as the electric one with an air motor drive, a narrowerflow range, and no amps line. It still prints an available voltage, which on an air-driven pumpcan only be the controller supply; that is an open question with the manufacturer.